LINE OF INTERIOR DESIGN
THIN COMPACT® Decorative Line enhances the value of compact slabs in various formats and finishes through its exclusive designs. There is a wide range of designs, both for floors and for wall borders. The color combinations are selected according to the needs of our customers.
FINISHING OPTIONS
| Dimensions | Thickness ≈ | Weight ≈ per piece | Weight ≈ per m2 | Weight ≈ per box | m2 per box |
|---|---|---|---|---|---|
| 300X300 mm | 13 mm | 2.65Kg. | 29.41 Kg. | 15.90 Kg. | 0.54 m2 |
| 400X400 mm | 17 mm | 6.50 Kg. | 40.625 Kg. | 32.5 Kg. | 0.80 m2 |
DESIGN COMPOSITION
| Type | Dimensions in CM | Quantity per M2 |
|---|---|---|
| A | square | 7×7 | 7.30 |
| B | rectangle | 7×30 | 14.60 |
| C | slab | 30×30 | 7.30 |
| TIPO | MEDIDAS EN CM | CANTIDAD X M2 |
|---|---|---|
| A | taco | 10×10 | 2.04 |
| B | listel | 10×30 | 8.16 |
| C | placa | 30×30 | 8.16 |
| Type | Quantity in CM | CANTIDAD X M2 |
|---|---|---|
| A | square | 7×7 | 11.10 |
| B | slab | 30×30 | 11.10 |
| Type | Dimensions in CM | Quantity per M2 |
|---|---|---|
| A | taco | 10×10 | 5.50 |
| B | placa | 30×30 | 11.10 |
| Type | Dimensions in CM | Quantity per M2 |
|---|---|---|
| A | square | 10×10 | 10.00 |
| B | slab | 30×30 | 10.00 |
| Type | Dimensions in CM | Quantity per M2 |
|---|---|---|
| A | square | 10×10 | 2.75 |
| B | slab | 30×30 | 11.10 |
| Type | Dimensions in CM | Quantity per ML |
|---|---|---|
| A | 1/2 square | 10×10 | 14.00 |
| B | rectangle | 4×30 | 6.67 |
| C | square | 10×10 | 7.00 |
| Type | dimensions in CM | Quantity per ML |
|---|---|---|
| A | rectangle | 4×30 | 6.67 |
| B | rectangle | 10×30 | 3.33 |
| TIPO | Dimensions in CM | Quantity per ML |
|---|---|---|
| A | rectangle | 7×30 | 2.70 |
| B | square | 7×7 | 2.70 |
| Type | Dimensions in CM | Quantity per ML |
|---|---|---|
| A | rectangle | 2.5×30 | 13.00 |
| B | rectangle | 2.5×30 | 3.50 |
| C | rectangle | 2.5×30 | 3.50 |
| Type | Dimensions in CM | Quantity per ML |
|---|---|---|
| A | rectangle | 2.5×30 | 6.66 |
| B | rectangle | 2.5×20 | 3.00 |
| C | rectangle | 2.5×5 | 3.00 |
| D | rectangle | 2.5×7.5 | 6.66 |
| E | rectangle | 2.5×27.5 | 3.50 |
| F | rectangle | 2.5×20 | 4.00 |
| G | rectangle | 2.5×5 | 7.00 |
| Type | Dimensions in CM | Quantity per ML |
|---|---|---|
| A | square | 4.75×9.5 | 15.00 |
| B | 1/2 square | 4.75×4.75 | 30.00 |
| C | rectangle | 2.5×30 | 6.70 |
INSTALLATION OF THIN COMPACT® DECORATIVE LINE
Installation of THIN COMPACT® DECORATIVE LINE over concrete base with Flexible Glue
THIN COMPACT ARGENTINA recommends the installation of its floors with THIN COMPACT® FLEXIBLE GLUE
- Spread a layer of FLEXIBLE glue with a 12 mm notched trowel for 300×300 mm formats and 14 mm for 400×400 mm formats, in order to maximize the properties of the slab.
- Lay the slabs with grout joints of at least 1.5 mm.
- Apply gentle even pressure on the slabs to achieve maximum contact with the glue.
- It is recommended not to allow traffic to pass over the slab before 24 or 48 hours after its installation.
- Since our products are made with all-natural raw materials, there may be variations in the shades of the slabs displayed in our points of sale and those that are eventually delivered.
Installation of THIN COMPACT® DECORATIVE LINE over traditional subflooring with Traditional mix
- Use a mixture of 1:1:5 (Cement-Lime-Sand) and one part, in 20 l. of water, of a plastic binder in the preparation; this provides an adequate plastic consistency improving the mortar and ensures a better adhesion.
- Paint, with a diluted pure cement slurry, the back of the slab and the subfloor without letting it dry. That is, the slab and the subfloor, one by one.
- Spread the mixture with a mason's spoon to a thickness of no more than 2 cm.
- Lay the slabs with grout joints of at least 1.5 mm.
- Apply gentle, even pressure on the slab to achieve maximum contact with the mixture.
- It is recommended not to allow traffic to pass over the slab before 24 or 48 hours after its installation.
Grouting joints in both installation methods
Grouting joints is very important as it complements the filling of the gaps that the glue or mortar did not cover.
- To grout joints, verify that the grooves are clean and that 24 hours have elapsed after their installation.
- Mix two parts of grout and one part of water to obtain a light paste suitable to be inserted in the joints.
- Distribute the preparation with a rubber floor squeegee, making sure that it penetrates into all the grooves. As the grout thickens, more water should be added to thin it again. If this is not done, the grout will not penetrate the joint and will only cover the top part, leaving air voids. This will cause the slabs to pop out.
- Once the joint has been properly filled, proceed to clean all the excess from both the joints and the slabs.
- It is recommended to wet the material applied in the joints with a sponge every 3 or 4 hours to avoid cracking.
Curing of THIN COMPACT® DECORATIVE LINE slabs
The curing of the slabs is essential after installation to seal the slabs permeability. This will prevent dirt from penetrating and facilitate subsequent cleaning.
- To cure the slabs, previously wash the surface to be treated with water and, if necessary, use a cleaner, which helps to remove the remains of dirt and dust. Then rinse with plenty of water and let it dry.
- Once clean and dry, at temperatures no higher than 28 °C, apply natural wax with a wax mop. Let dry and polish. Repeat the process to achieve a better finish.